Custers Hydraulica B.V. designs and manufactures truck mounted platforms from 12m to 26m.
Our range consists of:
Aerial work platforms on vehicles with GVW of max. 5t
Aerial work platforms on vehicles above 5t GVW
Truck mounted platforms GVW max. 5t: ML/MV-models
These lifts are available in three working heights, namely 12m, 14m and 17m. Max. cageload is 230kg. The 12m is an articulated lift, the 14m and 17m are articulated/telescopic lifts.
The lift can be mounted on a chassis-cabin (=ML-model) with a flat loading floor or if needed with a custom-build materialbox. These ML-models are normally equipped with two hydraulic outriggers. As an option four outriggers can also be mounted, provided there are no strict vehicle weight restrictions.
Apart from this model, we do also install our lifts on a van, this is the MV-model. These MV-lifts have two hydraulic outriggers.
Truck mounted platforms GVW above 5t
These trucklifts have a max. cageload of 265kg, 300kg and 330kg. The truck mounted lifts with a working height from 12-18m have a max. cageload of 265kg, the trucklifts with a working height from 20m-26m have a max. cageload of 300-330 kg. The 12m is an articulated lift, the other models are articulated/telescopic truck mounted lifts. The lift can be build on a chassi-cabin with a flat loading floor or if needed a custom-build materialbox can be installed.
These truck mounted lifts are driven by a failsafe PLC. All movements are fully proportional and multiple simultaneous movements can be carried out.
This aerial work platform can be driven by the PTO of the truck or by a seperate battery-pack.
Each truck mounted platform is built according the needs of our clients. On demand a list with options is also available.